Tomix N Easement Wide PC Curve Track 13-15/16" Radius, 22.5°
Pickup currently unavailable at In Store
Tomix N Easement Wide PC Curve Track 13-15/16" Radius, 22.5°
In Store
4/47 Wises Road
Buderim QLD 4556
Australia
✅ Total stock available including at warehouse (note if Pickup unavailable above, please be aware of increased shipping times for warehouse stock): 0
Ask us to order you one from our supplier
This is a wide curve cant introduction rail with a radius of 354mm, a curve angle of 22.5°, and a width of 37mm. A canted rail where the rail on the outside of the curve is higher than the inside, and the rail is introduced from flat without cant to canted rail gradually.
Features
- Ballast and sleepers are painted for a beautiful appearance
- PC sleepers are expressed
- Rails are joined together with nails for easy and reliable connection
- Connection compatible with conventional TOMIX rails
- Handrails, side walls, and fences (sold separately) can be attached to the side of the rail
- Compatible with single-track piers by attaching the separately sold single-track pier base to the bottom
- Can be used as a double-track rail by connecting CR (L) 391-22.5-WP (sold separately) to the outside
- Wide rail when used as a double-track rail Compatible with double-track elevated piers by attaching a coupling for the cant section (coupling for wide rails and slab rails on the flat lead-in section) to the underside. - Power supply by attaching a feeder for wide rails and slab rails to the underside (feeder for slab rails) . (Can also be installed, conventional feeders cannot be installed)
- Structurally not compatible with sensor installation
- Compatible with various overhead line pole attachments
- Cant inclination angle gradually changes from 0 degrees to approximately 4 degrees with a curve angle of 22.5 degrees
- One set of two each: CR, which gradually cants while curving to the right, and CL, which gradually cants while curving to the left
- Wide PC approach rail CR354-22.5-WP(F)
- Wide PC approach rail CL354-22.5-WP(F)
- Runner parts: Wide rail joint
A note on product warranties.
Please note: RC models are warranted for manufacture defects only. This hobby involves moving models which often suffer from damage when they are put under undue strain or when they collide with objects or are subjected to water. Techtonic Hobbies cannot be held responsible for items which are damaged through use, and as such please understand that no mechanical warranty of any kind is offered on items once they have been used if the item has suffered damage from any of the conditions listed above. Please choose carefully, paying special attention to the type of use and the age of the user of your new model, RC models are designed to be tough, but everything has its limits and we cannot be held responsible for damages that result from when those limits are exceeded. We have no way of telling what a model has been subjected to once it leaves the store / warehouse. Your consumer rights are not affected.