Hobbywing Ezrun MAX10 G2S 140A ESC 2-4S LiPo with Adjustable 5A BEC
In store availability:
Pickup available at Wises Road Store
Usually ready in 1 hour
Hobbywing Ezrun MAX10 G2S 140A ESC 2-4S LiPo with Adjustable 5A BEC
Wises Road Store
4/47 Wises Road
Buderim QLD 4556
Australia
Tax included. Shipping calculated at checkout
Hobbywing Ezrun MAX10 G2S 140A Brushless ESC
The Hobbywing Ezrun MAX10 G2S is a 1/10 scale brushless ESC for 2–4S LiPo setups, with sensored and sensorless motor support, integrated Bluetooth programming, internal data logging and an adjustable 5A BEC up to 8.4V. It builds on the MAX10 G2 with the same power ratings and case while adding setup and monitoring features through the HW LINK app.
Key Features
- Integrated Bluetooth module inside the power switch for smartphone programming without additional hardware.
- Internal data logging records the last 10 minutes of runtime for graphical review in the HW LINK app.
- Turbo timing up to 32 degrees, allowing up to approximately 25% higher maximum RPM with an Ezrun 3652/3665 G3 motor.
- Three-step adjustable BEC: 6V, 7.4V or 8.4V at 5A in switch mode.
- Frameless fan with side air discharge, switched on by temperature.
- Waterproof sensor interface with dust and water protection to IP67.
- Capacitor overheat protection.
- Two programming routes: Bluetooth through the HW LINK app or an LCD program box.
- Firmware upgrades through the app and OTA program module support.
- Protection against low voltage, overheating and loss of signal.
Specifications
| Specification | Detail |
|---|---|
| Type | 1/10 brushless, sensored and sensorless |
| Current, continuous / peak | 140A / 880A |
| Input voltage | 2–4S LiPo |
| BEC | 6V / 7.4V / 8.4V adjustable, 5A continuous, switch mode |
| Motor types | Brushless motors with and without sensor |
| Motor limit, 2S LiPo | KV ≤ 6000, 3652-size motor |
| Motor limit, 3S LiPo | KV ≤ 4000, 3665-size motor |
| Motor limit, 4S LiPo | KV ≤ 2600, 4268-size motor |
| Turbo timing | Up to 32 degrees |
| Fan | Yes, powered by the BEC |
| Programming | Bluetooth through the HW LINK app, LCD program box or OTA program module |
| Programming port | Separate, 3-pin |
| Waterproof rating | IP67 |
| Input connector | XT60 |
| Output connectors | Gold bullet sockets |
| Dimensions | 53 × 39.5 × 37.2 mm |
| Weight | 125 g, including wires and connectors |
| Applications | 1/10 short course truck, truck and monster truck |
Package Includes
- The supplied product information does not provide a separate package-contents list.
Important Notes
- A 3S battery or larger is required to use the 7.4V or 8.4V BEC settings.
- Turbo timing and motor overheat protection only work with a supported Hobbywing motor, such as the Ezrun 3652/3665 SD G3.
- The effective Bluetooth range is approximately 5 m by design.
Compared with the MAX10 G2, the MAX10 G2S adds integrated Bluetooth, internal data logging and an 8.4V BEC step for high-voltage servos while retaining the same power ratings and case.
A note on product warranties.
Please note: RC models are warranted for manufacture defects only. This hobby involves moving models which often suffer from damage when they are put under undue strain or when they collide with objects or are subjected to water. Techtonic Hobbies cannot be held responsible for items which are damaged through use, and as such please understand that no mechanical warranty of any kind is offered on items once they have been used if the item has suffered damage from any of the conditions listed above. Please choose carefully, paying special attention to the type of use and the age of the user of your new model, RC models are designed to be tough, but everything has its limits and we cannot be held responsible for damages that result from when those limits are exceeded. We have no way of telling what a model has been subjected to once it leaves the store / warehouse. Your consumer rights are not affected.