FMS 1220mm Ranger V2 RTF RC Airplane with Reflex V3 (Mode 2 – Choose Colour)
In store availability:
Pickup available at Wises Road Store
Usually ready in 1 hour
FMS 1220mm Ranger V2 RTF RC Airplane with Reflex V3 (Mode 2 – Choose Colour)
Green
Wises Road Store
4/47 Wises Road
Buderim QLD 4556
Australia
Tax included. Shipping calculated at checkout
FMS 1220mm Ranger V2 RTF – Best Beginner RC Airplane with Reflex V3 Stabilization
The FMS 1220mm Ranger V2 is a ready-to-fly RC airplane built for beginner pilots who want stable, confidence-inspiring flight straight out of the box. Featuring the factory-installed Reflex V3 flight stabilization system and a high-winged EPO foam airframe, the Ranger V2 delivers effortless handling, short take-off runs, and up to 10 minutes of flight time.
Available in Red, Green, or Yellow — the high-visibility color schemes make orientation easy even in overcast conditions. The two-piece fuselage and wing design reduces packaging by 30%, making transport and storage simple.
Key Features
- Reflex V3 Flight Controller – Stabilised, Optimised, and Manual flight modes factory installed
- High-Winged EPO Foam Airframe – Stable, low wing-loading with exceptional lift at slow speeds
- 3136/1200KV Motor + 20A Predator ESC – Near-vertical climb performance on demand
- Crash-Proof Spring Nose Gear – Patented cushioned nose landing gear for all-terrain ground handling
- 3–10 Minute Assembly – Screw and twist-lock construction; no glue required
- Float-Ready – Optional floats available for amphibious operation
- 3 Colour Options – Red, Green, or Yellow high-visibility schemes
- Less than 3m short take-off and landing (STOL) capability
- 10–15 minute flight time (RTF version)
- One-piece horizontal stabiliser for precise pitch response
Important Buyer Notes
① RTF (Ready to Fly) includes transmitter, receiver, battery, charger, and all electronics pre-installed.
② PNP (Plug-and-Play) includes ESC, motor, and servos pre-installed — transmitter, receiver, battery, and charger not included.
③ Packaging may read "Ranger V3 with Reflex V2" due to a printing error. The correct model is Ranger V2 with Reflex V3.
④ A T6 Torx screwdriver is required to install the vertical stabiliser connecting rod.
⑤ Float-equipped orders ship as two separate packages.
Specifications
| Specification | Value |
|---|---|
| Wingspan | 1220mm / 48in |
| Overall Length | 947mm / 37.3in |
| Flying Weight | 1200g (Float Included) |
| Motor Size | 3136-1200KV |
| ESC | 20A Predator |
| Servo | 9g × 5pcs (Float Included) |
| Radio | 6 Channel (RTF Version) |
| CG (Centre of Gravity) | 50–60mm from Leading Edge |
| Prop Size | 10×5 2-Blade |
| Recommended Battery | 3S 1300mAh 25C |
| Battery Compartment | 100 × 60 × 40mm |
| Battery Connector | XT60 |
| Aileron | Yes |
| Elevator | Yes |
| Rudder | Yes |
| Flaps | No |
| Retracts | No |
| Approx. Flight Duration | 10 min |
| Minimum Age | 14+ |
| Experience Level | Beginner |
| Assembly Time | 3–10 minutes |
| Wing Load | 39.4 g/dm² (0.11 oz/in²) |
| Wing Area | 25.4 dm² (393.7 in²) |
Meet the Ranger V2
A 1220mm RC trainer combining a high-wing design with Reflex V3 flight stabilisation. The Ranger V2 brings together beginner-focused handling and a choice of three bright colour schemes.
Stable Flight with Reflex V3 Flight Controller
Beginner-Friendly High-Wing Design
The wing sits above the fuselage for a stable trainer layout. Low wing loading helps the Ranger V2 maintain lift at slower speeds, giving new pilots a platform for practising controlled flight.
Brushless Power System
A 3136-1200KV brushless motor and 20A Predator ESC power the Ranger V2's 10×5 two-blade propeller. This matched setup provides the power for take-offs, cruising and climbing.
EPO Foam Airframe Material
Quick, Glue-Free Assembly
Screw and twist-lock connections make assembly straightforward without glue. The two-piece wing and fuselage design also helps make the aircraft easier to transport and store.
Optional Float Flying
Add the optional float set to explore water-based flying. The floats shown are an accessory and are not included with the standard aircraft package.
Take-Offs and Landings on Water
With the optional floats fitted, the Ranger V2 can take off from and land on water. This accessory adds another way to enjoy the aircraft beyond a conventional runway.
Ready to fly in just three meters, Ranger V2's STOL (Short Takeoff and Landing) features make it perfect for small spaces. No long runways needed just power up and go!
RTF and PNP Explained
This listing is for the RTF version, which includes a transmitter, receiver, battery and charger. The PNP version shown for comparison includes the motor, ESC and servos but requires separate radio equipment, a battery and a charger.
Ranger V2 in Flight
The Ranger V2 combines a 1220mm wingspan with a lightweight EPO airframe. Its high-wing layout and flight stabilisation make it a beginner-focused choice for learning the basics of RC flying.
Red, Yellow, or Green Paint Schemes Available
A note on product warranties.
Please note: RC models are warranted for manufacture defects only. This hobby involves moving models which often suffer from damage when they are put under undue strain or when they collide with objects or are subjected to water. Techtonic Hobbies cannot be held responsible for items which are damaged through use, and as such please understand that no mechanical warranty of any kind is offered on items once they have been used if the item has suffered damage from any of the conditions listed above. Please choose carefully, paying special attention to the type of use and the age of the user of your new model, RC models are designed to be tough, but everything has its limits and we cannot be held responsible for damages that result from when those limits are exceeded. We have no way of telling what a model has been subjected to once it leaves the store / warehouse. Your consumer rights are not affected.