Bob Smith Industries FOAM-CURE EPP/EPO Foam Glue 120ml
In store availability:
Pickup available at Wises Road Store
Usually ready in 1 hour
Bob Smith Industries FOAM-CURE EPP/EPO Foam Glue 120ml
Wises Road Store
4/47 Wises Road
Buderim QLD 4556
Australia
Tax included. Shipping calculated at checkout
FOAM-CURE is a silicone-based adhesive specially formulated for EPP and EPO foams. It cures crystal clear to a flexible finish — ideal where CA glue would be too brittle. Unlike CA, it is not instant-bonding, but a simple contact-cement technique can significantly speed up the initial tack.
How to Use
- Cut off the tip of the nozzle.
- Apply FOAM-CURE to one surface before joining the parts.
- For faster bonding: join the parts, pull them apart, and let the adhesive air dry for 5–10 minutes. Rejoin — the contact-cement tack allows assembly to continue immediately.
- Use tape to hold parts in place during full cure.
- Full cure is reached in 10–12 hours.
- Clean up uncured adhesive with denatured alcohol. Replace cap after use.
Works Best On
- EPP Foam
- EPO Foam
- Clear canopies
- Wood to foam bonds
- Plastic to foam bonds
- Paper and crafts
Key Features
- Formula: Silicone-based, solvent-carried adhesive
- Cure time: Full strength in 10–12 hours
- Finish: Crystal clear
- Flexibility: Flexible cure — will not crack or shatter like CA
- Volume: 4 fl. oz. (120ml)
Limitations
FOAM-CURE requires air exposure to cure. It is not suitable as a hinge adhesive for control surfaces, and is not recommended for bonding large areas of two non-porous materials (e.g. coin to glass), as the solvent cannot evaporate from sealed surfaces.
SKU: BSI142H
A note on product warranties.
Please note: RC models are warranted for manufacture defects only. This hobby involves moving models which often suffer from damage when they are put under undue strain or when they collide with objects or are subjected to water. Techtonic Hobbies cannot be held responsible for items which are damaged through use, and as such please understand that no mechanical warranty of any kind is offered on items once they have been used if the item has suffered damage from any of the conditions listed above. Please choose carefully, paying special attention to the type of use and the age of the user of your new model, RC models are designed to be tough, but everything has its limits and we cannot be held responsible for damages that result from when those limits are exceeded. We have no way of telling what a model has been subjected to once it leaves the store / warehouse. Your consumer rights are not affected.